DESCRIPTION

An economic grade based on a mixture of aramid and glass fibres, with a nitrile rubber binder. Klingersil C4400 also has an anti-stick finish on both sides.

SERVICE

Good resistance to: oils, hydrocarbons and low pressure steam and water. Very successful in internal combustion engine applications.

 

Max recommended temperature : OPERATING 400°C

Max recommended temperature : OPERATING STEAM 150°C

Max recommended pressure : 65 BAR

 

These temperature and pressure guides cannot necessarily be used simultaneously and may not apply to all thicknesses. The operating temperature for non-asbestos sheet materials is related to the thickness of the material. Thinner materials offer better temperature and pressure properties.

 

 APPROVALS/COMPLIANCE

Complies with BS specification 7531 Grade Y Fire safe HTB 90.0223.39.0 BAM U W28 for use with oxygen 100°C & 80 Bar DIN-DVGW SVGW 95-053-7 KTW X 027/95/st

ALL PRESSURES AND TEMPERATURES ARE SUBJECT TO INDIVIDUAL APPLICATION

TYPICAL PHYSICAL PROPERTIES KLINGERSIL C4400

Compression ASTM F36A 11%
Recovery ASTM F36A 55%
Stress Relaxation DIN52913 50MPa, 16h/175°C 50MPa, 16h/300°C 32MPa 25MPa
Stress Relaxation BS7531 23MPa
Klinger cold/hot compression (50MPa) Thickness decrease 23°C Thickness decrease 300°C 10% 20%
Gas leakage DIN 3535/6 0.02ml/min
Thickness after fluid Oil nr.3:5h/150°C 3%
Immersion ASTM F146 Fuel B:5h/23°C 5%
Chlorides (soluble) 150ppm
Density 1.6g/cm³