DESCRIPTION
An economic grade based on a mixture of aramid and glass fibres, with a nitrile rubber binder. Klingersil C4324 also has an anti-stick finish on both sides.SERVICE
Suitable for general industrial service including: oils, hydrocarbons and low pressure steam and water.Max recommended temperature : OPERATING 300°C
Max recommended temperature : OPERATING STEAM 150°C
Max recommended pressure : 50 BAR
These temperature and pressure guides cannot necessarily be used simultaneously and may not apply to all thicknesses. The operating temperature for non-asbestos sheet materials is related to the thickness of the material. Thinner materials offer better temperature and pressure properties.
APPROVALS/COMPLIANCE
Complies with BS specification 7531 Grade Y DIN-DVGW SVGW 95-043-7 KTW X 027/95/st WRC APPROVEDALL PRESSURES AND TEMPERATURES ARE SUBJECT TO INDIVIDUAL APPLICATION
TYPICAL PHYSICAL PROPERTIES KLINGERSIL C4324
| Compression | ASTM F36A | 10% |
| Recovery | ASTM F36A | 55% |
| Stress Relaxation DIN52913 | 50MPa, 16h/300°C | 20 MPa |
| Stress Relaxation BS7531 | 23MPa | |
| Klinger cold/hot compression (50MPa) | Thickness decrease 23°C Thickness decrease 300°C | 11% 26% |
| Gas leakage | DIN 3535/6 | <0.1ml/min |
| Chlorides | (soluble) | 150ppm |
| Thickness after fluid | Oil nr.3:5h/150°C | 0-10% |
| Immersion ASTM F146 | Fuel B:5h/23°C | 0-10% |
| Density | 1.85/cm³ |