DESCRIPTION
A mild steel wire mesh reinforced, high quality asbestos free material which complies with the test requirements for BS7531 Grade X. Composed of aramid/inorganic fibres, bonded with Nitrile elastomer. The formulation gives the material good chemical stability and an excellent resistance to creep at high temperature. This material has a fine, mild steel mesh reinforcement and is graphited.SERVICE
High temperature applications. It is suitable for: gases, oils, solvents and high pressure steam, most dilute acids and alkalis and oxygen. The mild steel wire reinforcement is particularly suitable for absorbing vibration and applications requiring a higher load bearing capacity.Max recommended temperature : SHORT TERM 450°C Max recommended temperature : OPERATING STEAM 250°C * Max recommended temperature : OPERATING STEAM 200°C * Max recommended pressure : 16.4MPa / 166 BAR
These temperature and pressure guides cannot necessarily be used simultaneously and may not apply to all thicknesses. The operating temperature for non-asbestos sheet materials is related to the thickness of the material. Thinner materials offer better temperature and pressure properties..
APPROVALS/COMPLIANCE
Complies with BS specification 7531 Grade XTYPICAL PHYSICAL PROPERTIES ‘X’ WIRE REINFORCED NAF
| Thickness | 1.5mm * | |
| Density | 1.97 g/cm³ | |
| Tensile Strength | ASTM F152 | 20 MPa |
| Compression | ASTM F36J | 9% |
| Recovery | ASTM F36J | 60% |
| Residual Stress | BS7531 (300°C) | 29.5 MPa |
| Fluid Immersion (thickness | ASTM Oil No. 1 | 1.5% |
| Fluid Immersion(thickness increase) | ASTM Oil No. 3 | 2.5% |
| Fluid Immersion (thickness increase) | ASTM Fuel B | 2.2% |